Three-rack safety PLC panel for a processing plant

A floor-standing PLC panel built by CWS from the customer’s drawings: three PLC racks, 24 V DC power supplies with redundancy modules, and the terminals that connect them to the plant.

Floor-standing PLC control panel with the door open, showing three PLC racks and neat trunking
Power supplies, terminals and PLC racks inside the panel, door open in the CWS workshop.
PLC racks
Three
Control supply
24 V DC, four power supplies
Enclosure
Floor standing
Built from
Customer drawings
The project brief

Their design.
Our build.

Not every panel starts with a CWS design. For this job the design already existed: the customer supplied the drawings for a safety PLC panel and needed it built as drawn.

CWS built and wired the panel in the Invercargill workshop.

What is inside

Racks, power and terminals

01 / PLC racks

Three racks of I/O.

Three Allen-Bradley ControlLogix racks carry digital input, digital output and analogue input modules, plus Ethernet network modules.

02 / Control power

24 V DC with redundancy.

Four 24 V DC power supplies feed the panel through two redundancy modules.

03 / Terminations

A place for every field cable.

Termination modules and labelled terminal rails take the field wiring.

04 / Network and auxiliaries

Switch and distribution board.

An Ethernet switch and a small 230 V distribution board complete the build.

PLC rack, 24 V DC power supplies and labelled terminals inside an industrial control panel
24 V DC power supplies, redundancy modules, terminals and one of the PLC racks.
Workmanship

Neat enough
to fault-find.

Devices carry their tag labels and the wiring runs in trunking. That matters long after the build, when someone has to trace a signal in a hurry.

Building from a customer’s drawings means following the set as drawn and raising questions before the wiring starts.

Explore industrial control panels
Where this fits

Panel build, with
or without design.

CWS builds control panels from customer drawings, as here, or designs and drafts them in-house.

PLC, HMI and SCADA work can be scoped separately.

Explore automation and control
Explore drafting services

Have a panel that needs building?

Send the drawings, the parts list and the date you need it.

IP Geolocation by DB-IP · CC BY 4.0