CWS / New Zealand manufacturing

Cold-storage and refrigeration switchboards.

Bring refrigeration feeders, building services and control interfaces into a coordinated distribution package. CWS manufactures project-specific main switchboards and distribution boards in Invercargill.

Completed four-section Simotrol main switchboard for a cold-storage upgrade
The project brief

Include the plant and the services around it.

A cold-storage load schedule covers more than the main refrigeration plant. Fan drives, defrost loads, control supplies, lighting, socket circuits and office services can all influence the board arrangement. Identify simultaneous operating loads and the interfaces to packaged equipment so the main distribution design reflects the complete site.

CWS coordinates main distribution, outgoing plant feeders and final-circuit distribution around the approved specification. Provide the refrigeration contractor’s equipment schedules and identify the boundary between the switchboard package, skid wiring, drive equipment and control system.

Metering, harmonic-filter supplies and protection interfaces need space and documented connections. Include the equipment references, CT requirements and trip or monitoring interfaces in the design brief. Their inclusion in a switchboard does not replace system-level studies, settings or commissioning.

For an upgrade, plan the cable transfer and shutdown sequence before manufacture. Existing cable lengths, bottom or top entry, transport access and the footprint of the replacement assembly may constrain the layout. Send photographs and the existing general arrangement with the proposed supply scheme.

Published CWS work

630 A cold-storage main switchboard upgrade

The published CWS cold-storage upgrade is a four-section Simotrol main switchboard rated 630 A, with a main-bus duty of 40 kA for one second and IP41 enclosure protection. It combines refrigeration supplies, two distribution boards, metering, harmonic-filter supply and protection interfaces. Photographs show the completed board, busbar construction and labelled distribution section.

Read the full case study

Your enquiry

Send the information that shapes the board.

  • Refrigeration, fan-drive, defrost and building-services load schedules.
  • Supply details, prospective fault level, protection study requirements and monitoring interfaces.
  • Existing and proposed cable entries, dimensions and available working space.
  • Shutdown sequence, temporary supplies, factory testing and commissioning responsibilities.

If some details are still being developed, identify them in your enquiry. Our design and manufacturing team can discuss the outstanding inputs and the scope needed for a quotation. Use the switchboard FAQs for general quoting, testing and delivery questions.

Common questions

Planning your package.

Does CWS manufacture the refrigeration plant?

The published case study covers the switchboard supply. Refrigeration equipment and drives must have their supply and integration responsibilities defined separately in the project scope.

Does an arc-flash relay make the switchboard arc resistant?

No. A relay and its trip interfaces are protection functions. An arc-resistant assembly classification and the installation’s incident energy require separate supporting evidence and assessment.

Bring us your project brief.

Send drawings, schedules, site location and the required programme to estimating@clivewilson.co.nz.

Request a switchboard quote
Planning guides

Plan the loads and the operating environment.

Where refrigeration loads include variable-speed drives, review MCC heat, space and cooling with the project designer. Use the motor and control schedule checklist and upgrade planning guide to prepare new work or changes to an existing installation.

IP Geolocation by DB-IP · CC BY 4.0