NZ-made Quantum switchboards
CWS builds main switchboards, distribution boards and field services panels on the Quantum modular cell system, made in New Zealand, and assembles them in our Invercargill workshop. The main switch, feeders, metering and distribution sections sit in their own cells behind doors or fixed covers, so a board can be laid out to suit the circuit schedule and the space available.

A board built from cells
The Quantum cell system is made in New Zealand. Cells sit on a 100 mm grid, each with its own door or fixed cover, and are joined into wall-mounted or floor-standing line-ups, with perforated cable zones between sections carrying the neutral and earth bars.
We fit moulded case circuit breakers in cells of their own, and miniature circuit breaker rows on distribution blocks behind Prisma front plates, PVC shrouds or laser-cut cover plates. Tariff metering current transformers, controllers, PLCs and variable speed drives go in separate cells.
Our Quantum boards are usually 1.5 mm Zintec steel, powder coated RAL 7035 unless the site asks for another colour. We build them with Schneider Electric and ABB switchgear.
For industrial main switchboards and motor control centres, Simotrol is also made in New Zealand.

Quantum cells inside an outdoor enclosure
Where a board stands outside, we fit the Quantum cells inside a Rittal aluminium enclosure or a custom stainless steel kiosk. The cells keep the main switch, metering and distribution apart, and the outer enclosure gives the weather protection.
We have built this arrangement for water pumps, school mechanical services and a catering facility. An outer enclosure changes the heat rise and enclosure protection of the board inside, so the ratings for the complete arrangement are confirmed at design stage. Our outdoor builds so far have been IP55 for the complete assembly.
For stand-alone outdoor enclosures, see outdoor switchboard kiosks.

Quantum boards we have built.
Our recent Quantum boards range from 100 A distribution boards to 400 A main switchboards. Each board is rated on its own: we confirm the current rating, fault rating, IP rating and form of separation for the devices, loading and enclosure of each design, and state them on the drawings.
| Board | Build and ratings | Used for |
|---|---|---|
| Refrigeration field services panel, six sections | 400 A, IP42, 3,200 mm wide. MCCB feeders in their own cells, refrigeration controllers and two distribution sections | Supermarket |
| Refrigeration field services panel | 400 A, IP30, 2,400 mm wide, fixed covers. Distribution section with contactors | Supermarket |
| Generator main switchboard | 400 A, 36 kA for 1 s, IP42. Grid and generator incomers, with the automatic transfer switch in a separate panel | Supermarket standby generation |
| Main switchboard with tariff metering | 250 A, 20 kA for 1 s, IP42. Tariff metering cell, MCCB feeders and two distribution sections | Retail food outlet |
| Hot water plant distribution board | 250 A, 20 kA for 1 s, IP42. PLC, HMI and three variable speed drives | Processing plant |
| Water pump main switchboard | 400 A, 20 kA for 1 s, Form 2b, IP55. Quantum cells inside a Rittal aluminium enclosure, with tariff metering | Water pumps |
| Main switchboard extension | 400 A, 20 kA for 1 s, IP55. Quantum sections added to an existing board of another make | School |
| Farm distribution board | 125 A, 20 kA for 1 s, IP42. Changeover switch and 125 A generator inlet | Farm |
For generator connections, see generator changeover panels.
Define the switchboard requirement
| Requirement | What to include |
|---|---|
| Supply | Incoming supply, prospective fault level at the board, and any generator or second supply. |
| Circuits | Outgoing circuit schedule, loads, spare ways and planned extensions. |
| Location | Indoor or outdoor, wall or floor standing, available space, cable entry from top or bottom, and access. |
| Protection | Preferred switchgear brand, discrimination or cascading, and surge protection. |
| Interfaces | Tariff or check metering, controllers, PLCs, drives and control connections. |
| Finish | Powder coat colour, labelling standard and any site colour codes. |
| Handover | Drawing, verification and factory-test requirements. |
Our quote request workbook sets these out as a schedule. See main switchboards for the wider CWS service.
Quantum switchboard questions.
What is a Quantum switchboard?
A modular switchboard built from sheetmetal cells on a 100 mm grid. Each cell has its own door or fixed cover, and cells are joined into line-ups to suit the board. The Quantum system is made in New Zealand.
Should my board be Quantum or PrismaSeT G?
The circuit schedule, the preferred switchgear brand, the space available and the client’s specification usually decide it. If a New Zealand-made system matters to you, say so at enquiry: Quantum and Simotrol are both made here. We can advise from the single line diagram. See PrismaSeT G switchboards.
Can a Quantum board be installed outdoors?
We fit the cells inside an aluminium outdoor enclosure or a stainless steel kiosk. Confirm weather exposure, solar heating, access and cable entry at enquiry, as these shape the enclosure and the assembly ratings.
Can you extend an existing board with Quantum cells?
We have added Quantum sections to an existing main switchboard of another make. Send the existing drawings, photographs and ratings so the connection, capacity and condition can be checked first.
Which switchgear do you fit?
Schneider Electric and ABB circuit breakers and switch-disconnectors, with miniature circuit breakers in the distribution sections. Send your preferred brand with the enquiry.
Discuss a Quantum board
Send the supply details, circuit schedule and where the board will sit.
